IOC straight stroke actuator

The switch type, intelligent direct stroke electric actuator adopts an advanced DSP system with double sealed waterproof casing, a "non-invasive" infrared setting, and a comprehensive protective system, which perfectly combines the precise control and high reliability of the retz electric actuator The on-site commissioning of IQC series actuators does not need to remove the end cover of the electrical box. All settings and adjustments are completed using the provided infrared setter. After assembly in the controlled environment of RETZ, air convection is eliminated and all internal components are protected for life. Non-intrusive control means that there is no through shaft through the control box 

For applications with high security requirements, IQC is required to be configured as conditional control. In this mode, the operation depends on two independent signals. Taking the valve closing command as an example, a remote valve closing input signal and a valve closing interlock input signal are provided at the same time, and the actuator will operate to close the valve. If only one signal is provided or one signal is lost, the actuator will hold or stop to prevent failure. When configured as conditional remote control, local operation does not require interlocking input